Pressure Units in Practice: PSI, Bar, kPa and mmHg
Ask a mechanic in Ohio and a mechanical engineer in Stuttgart about the same tire, and one will say "32 psi" while the other says "2.2 bar". Neither is wrong. Pressure is one of the few physical quantities where every industry picked its own unit and then refused to give it up. Weather reports use hectopascals, medicine uses millimeters of mercury, American HVAC techs read inHg on their gauges, vacuum labs state pressures in millibar or Torr, and SI purists insist on kilopascals. If you build any tool, spec sheet, or report that crosses one of these boundaries, you need the conversions to be boring and reliable.
The units, and where each one actually lives
The SI unit is the pascal: one newton per square meter. A pascal is tiny — about the weight of a piece of paper spread over a square meter — so real work happens in:
- kPa (1000 Pa): Canadian tire gauges, weather in most of Europe, engineering textbooks. Atmospheric pressure at sea level is 101.325 kPa.
- bar (100 kPa): European industry almost exclusively. Tires, plumbing, dive tanks, boilers. Nice property: 1 bar ≈ 1 atmosphere, so numbers stay close to what you feel.
- psi (pounds per square inch): USA. Tires, compressed air tools, gas cylinders, paintball, most of the English-speaking internet.
- mmHg and its twin Torr (1 mmHg = 133.322 Pa): blood pressure, vacuum science, meteorology in the past.
- inHg (3386.39 Pa): US aviation altimeter settings, US weather reports, manifold gauge sets.
The anchor numbers worth memorizing: 1 bar = 100 kPa = 14.5038 psi. One atmosphere = 1.01325 bar = 14.6959 psi = 760 mmHg = 29.921 inHg. If a quick mental estimate is enough, bar-to-psi is "times 14.5" and psi-to-kPa is "times 6.9". That covers estimating whether 32 psi is a sensible car tire (it is, about 2.2 bar) without touching a calculator.
Gauge versus absolute: the error that quietly breaks specs
The most expensive pressure mistake is not misplacing a decimal. It is forgetting that the same digit string can be absolute or gauge pressure. psig (gauge) measures relative to the surrounding atmosphere; psia (absolute) measures relative to a perfect vacuum. They differ by roughly 14.7 psi / 1.013 bar at sea level.
Your tire gauge reads 0 psi on the roadside — it measures gauge. A scuba compressor spec that says "fill to 232 bar" means gauge. But a pump datasheet reading "0.5 mbar" usually means absolute. Vacuum engineering is where this bites hardest, because there 1 mbar of difference is a process condition, not a rounding error. A leak-test spec of "200 mbar" in the gauge world is 201 mbar absolute — fine — but the same number quoted as absolute in a medium-vacuum context is off by a full atmosphere.
Two habits prevent this:
- Whenever a unit shows up in your product or docs, write the suffix: psi-g, psi-a, bar-g, mbar abs. If the source spec doesn't say, ask before you transcribe it.
- Never let "negative pressure" into a report. Gauge pressure can read −0.8 bar at sea level; absolute pressure cannot go below zero. If something reads negative on an absolute scale, it's a calibration fault, not a physical result.
Why mmHg survived: it was never a math choice
Millimeters of mercury are literally a length — the height of a mercury column the pressure can support. Standard atmosphere = 760 mmHg, and 760 mm expressed in inches is 29.92 — the same number as the inHg standard. Torr is the same value, named after Torricelli; treat 1 Torr = 133.322 Pa and 1 mmHg = 133.3224 Pa, and stop worrying about the difference unless you are calibrating a mercury manometer.
Blood pressure "120 over 80" is 120/80 mmHg, i.e. 16.0/10.7 kPa — but no clinician on the planet wants kPa. If your app displays medical data, keep mmHg and convert internally. Meanwhile American altimeters report QNH in inches of mercury (29.92 is standard) while most of the world uses hectopascals (1013). Aviation learned the hard way to treat these as two locked conventions, not as something to convert on the fly.
Mixups from the field
- Tires. A US rental placard says 32 psi; the European sticker on the same chassis says 2.2 bar. 32 psi = 2.207 bar, so the placards agree — but a driver who pumps "2.2 psi" drives on under-inflated tires. This exact confusion shows up in fleet dashboards that ingest international telematics data.
- Dive cylinders. Europe fills to 200 or 232 bar; the US standard is 3000 psi, which is 207 bar. A US tank rated 3000 psi filled "to 232 bar" would hit 3365 psi and fail its hydro test.
- Refrigeration and HVAC. R-410A saturation pressures get quoted in psi in the US, kPa in Canada, bar in Europe. A technician reading a kPa chart against a psi gauge is 6× off — that mistake destroys compressors.
- Steam and process plants. Old plant drawings in kgf/cm² sit next to new ones in MPa. 1 kgf/cm² = 98.0665 kPa — almost, but not exactly, 1 bar. "Almost the same" is the worst thing a pressure unit can be.
Converting without embarrassing yourself
For spec sheets and documentation, don't convert in your head. The exact factors are:
- 1 psi = 6.894757 kPa
- 1 bar = 14.50377 psi
- 1 mmHg = 133.3224 Pa
- 1 inHg = 3386.39 Pa
- 1 at (technical atmosphere, kgf/cm²) = 98.0665 kPa
When a task involves a whole table of readings — say, normalizing a sensor export in psi into a spec sheet in bar — one-off conversion is the slow and error-prone route. A purpose-built tool like the pressure converter handles single values, and when the export has hundreds of rows in mixed units, the batch unit converter processes the whole column and keeps the rounding rule consistent — which matters as much as the factor itself, because "2.2 bar" and "2.207 bar" are, respectively, a placard and a court exhibit.
Two rules that survive auditing:
- Round at the end, not per step. Converting psi → kPa → bar stepwise and rounding between steps can drift by a tenth of a bar — plainly visible on any tire gauge.
- Keep the original value next to the converted one. Every pressure-related incident report starts with someone trying to reconstruct which column was which.
Pressure is not exotic physics. It is a small set of constants, one cultural question — gauge or absolute — and the habit of writing units next to every number. Do that, and conversions become a non-problem you solve in seconds instead of a debugging session with a tire gauge.